1 1/2" Thick Solid Wood Custom Table Top - 2' to 6'

We aim for your delivery experience to match the exceptional quality of our products. Our table tops are custom-made to order, typically requiring 2-3 weeks for completion. Unfinished table tops are carefully packaged on a handcrafted pallet that exceeds the dimensions of the table top by approximately 2 inches in both width and length. For fully finished table tops, we utilize a custom crate that is generally 5 inches larger in both dimensions.

If you opt for our free shipping, it includes pickup at your nearest freight terminal, with the pickup address provided via email a few days post-order. Once dispatched from our warehouse, delivery usually takes about 3-5 days, and the freight terminal will notify you when your package is ready for collection.

For residential delivery, there is a nominal upgrade fee of $134.95, which ensures the package is delivered to your specified address. However, please note that this is curbside delivery, so assistance will be necessary to unload the package from the freight truck. Liftgate service is available upon request for an additional fee.

Commercial deliveries are available for $69.95. After your order is placed, we will verify that the address is a legitimate commercial location. Once shipped, you will receive tracking information solely from the freight carrier, so please ensure you are available to accept the delivery.

Q. What Is The Ideal Environment for Solid Wood Furniture?

• Temperature/Humidity: Furniture must be kept in controlled conditions with an optimal environment temperature ranging from 70 to 72 degrees Fahrenheit with roughly 30-50% relative humidity. If the product is exposed to extreme changes in temperature the following could/will occur – materials may contract and expand which will cause materials to “move.” This may cause checking/cracking and/or warping. None of the above conditions would be considered manufacturing defects as wood is a natural, breathing element that responds to its environment. 

• UV Exposure: Furniture should be protected from direct sunlight. Direct UV exposure will cause sun-fading or bleaching after prolonged exposure. Over time, there is a natural aging process and the finished surface will undergo natural color changes

• Storage: When storing a finished or unfinished piece of wood, it is important it has adequate support to stay flat and there is good air flow to all sides of the piece. If left inside the packaging or placed with one side on a blanket or other smothering surface for an extended period of time, it is very likely the slab will move resulting in bow, cup, twist, and/or cracking.

Q. Can I Adjust/Cancel My Order?

• All Custom orders are processed promptly, typically on the same or following business day to ensure quick turnaround times. Once processing has been started, orders are not eligible for cancellation or refund, however, minor adjustments in size and/or finishing details may be possible depending on the initial order size, and the stage of processing it is currently at. (Any requests/changes to the order after it has been placed may result in longer lead times.)

Q. Can I See The Boards Used To Build My Table?

• Pictures show examples of the custom table top product, and are not the exact top you will receive. You can request to see the selected boards prior to the start of the table build for a $75 additional charge, which covers minor adjustments. Any major adjustments are up to discretion of the shop.

More Product Information -

Finish Level

• Unfinished/DIY - Ready to ship in 1-2 weeks, your top arrives built to your specific dimensions, flattened on both sides and ready for the finishing steps! From there, fill any large voids/cracks with the filler of your choice, and begin sanding!

• Fully Finished - Have your top ready for installation! Ready to ship in 2-3 weeks, all finished tops will be flattened on both sides, finished sanded to 220 grit on the top side, all large voids/cracks filled with epoxy, and sealed with our Satin Lacquer or Rubio Monocoat Oil finishes! (If a finish is not requested, our craftsmen will select one based on characteristics of the wood used to craft the tables(s))
  • When Rubio Monocoat Oil Plus 2C is selected as the finish, the bottom/back side of the piece will be sealed with Satin Lacquer and the Top/Sides will have Rubio applied. Rubio can be applied to both sides upon request at an additional cost.

Edge Type

• Sculpted Live Edge - manufactured by our craftsmen based on actual live edge templates. Sculpted Live Edge Tops can have a width variation of 1-2" on each side. (Sculpted Live Edge tops with both sides sculpted can have a width variance of 2-4" below your selected width)

• Straight Cut Edges - Sleek, modern look! All straight cut edges will have a slightly eased/rounded edge with sandpaper to avoid sharp edges.

Sanding Finish

• Smooth Sanded - Traditional finish providing a 100% smooth top. Sanding Starts at 80 grit paper all the way to 220 grit to provide an even, perfect finish.

• Rustic Grinder Finish - Add a textured rustic look to your top, while keeping the surface of the table smooth enough to remain flat, not risking catching splinters, or major dips in the wood.

Thickness Options -

• 1 1/2" Thick Tops - The typical thickness for custom builds. Built to your dimensions out of 2" stock wood. When built and flattened the overall thickness of each table top will range from 1 1/2" - 1 3/4".

• 3" Thickened Edges - The thickened edge option will give you the look of 3" thickness. We build our 1 1/2" thick table tops a little longer, and a little wider than your final dimensions. Then fold over the perimeter of the table to give you the appearance of a thicker top. This method allows the grain to be bookmatched and mirrored on the ends and sides of the table top for a more consistent look. Final Table Top Thickness will range from 3" - 3 1/2"