Dining Table w/ Metal Hourglass Legs
Table Top
Tops are made to approximately 1 1/2" - 1 3/4" thickness. We have listed popular sizes but they are fully customizable, if you don't see what you are looking for listed, be sure to chat or call us to get a custom quote.
Our unique custom tops and bases are perfect to upgrade your dining table, bar top, islands, and more. Customize this Custom Solid Wood Table Top and Metal Hourglass Legs to your specific dimensions, wood type, edge type, and finish to receive a ready to install piece!
Each top is built from sustainably sourced lumber boards that are hand selected to meet your specific dimensions. Tree growth is affected by many different variables, which leads to different grain patterns, color variation, and figure in each board. We take care to select boards with similar characteristics but no two boards are the same, and this natural variation gives each custom piece its own unique appearance. As a natural element, wood will gradually show signs of aging as it reacts to its environment, leading to beautiful changes over time.
Legs
Legs are build to 28" wide x 28" tall giving you a 29 1/2" - 30" tall dining table after putting the top in place. Legs are hand crafted and powder coated with a dull black textured powder coat, our most popular color. If you prefer a different color, these can be coated in any color available.
| Finished & Ready to use! |
This Table Top & Legs come Fully Finished and ready to use! Table Tops are built to dimension, flattened on both sides, finish sanded to a 220 grit on the top side, all large voids/cracks filled with epoxy, and sealed with your choice of Satin Lacquer or Rubio Monocoat Oil Finish. Metal Legs are built to dimension and either left as Raw Steel or Powder coated, depending on your selection.
|
| Choose Your Wood Type |
Select from true, solid Black Walnut, Maple, or White Oak wood. *Each species will have natural color variations. Black Walnut Tables may or may not contain Sapwood, depending on available boards. |
| Choose Your Dimensions |
Select your desired Table Top Dimensions from the Drop Down box, starting with the Thickness! Choose from our standard 1 1/2" Thick table tops or go big with our 3" Thickened Edge, then select your desired Dimensions are listed as "Width" x "Length". |
|
Choose Preferred Edge
|
Get a soft, natural look with our Sculpted Live Edge or a sleek, modern look with a Straight Edge. Sculpted Live Edge Table Tops can have a width variance of 2-4" below your selected width.
|
| Choose Your Finish |
Choose to have your table finished with our Rubio Monocoat Oil Plus 2C or Commercial Grade Indoor Satin Lacquer. Both finishes are protective and bring out the gorgeous color and character of the wood!
Rubio Monocoat Oil Plus 2C is a hard-wax oil finish that sinks into the surface of the wood to seal it leaving a more matte, natural finish. Satin Lacquer is a more traditional finish that leaves a stunning satin sheen.
**When Rubio Monocoat Oil Plus 2C is selected as the finish, the bottom/back side of the piece will be sealed with Satin Lacquer and the Top/Sides will have the Rubio applied. Rubio can be applied to both sides upon request at an additional cost.
|
| Leg Installation & Placement |
All mounting hardware will be included with your table top & metal legs. Mounting hole will be pre-drilled on the bottom side of the table for easy layout and mounting upon arrival.
On Tables 72" - 84" in Length: Mounting Holes will be drilled 12" in from each end. On Tables 96"+ in Length: Mounting holes will be drilled 18" in from each end. Actual leg placement can be adjusted upon arrival if desired.
|
| Additional Customization Available |
Needing to further customize your table? Head over to our Custom Table Top Listings to build your top with even more customization options, or chat with our team of Wood Experts!
|
| Assembly Required |
For safety in transit from us to you, the table top and legs will be disassembled. All pieces will be labeled for easy assembly and screws are included with the shipment.
|
Ready to ship in 2-3 weeks and Ships Free to the Lower 48 States
USA Made in Webster City, IA. Shipped to your home or business anywhere in the United States and Canada.
*Pictures show examples of the product and are not the exact items you will receive. Options shown in pictures: 1 1/2" Thick, Black Walnut, Straight Edges.
*Color, Character, Grain Pattern, and Natural Characteristics will vary between each piece. These characteristics are not considered defects and will not result in a refund or replacement of the product.
*Finished pieces may need refinishing over time due to wear and tear from normal use. If the piece is used outside and/or exposed to the elements, such as large temperature/humidity changes, moisture, direct sun, etc., it may need refinishing more often.
*The thickened edge option will give you the look of 3” thickness. We build our 1 ½” thick table tops a little longer, and a little wider than your final dimensions, and fold over the perimeter of the table top to give you the appearance of a thicker top. This method allows the grain to be mirrored on the ends and sides of the table top for a more consistent look. Final Table Top Thickness will range from 3" - 3 1/2".
*Thickened portion of edge may be thinner than the main table top itself. Should not be noticeable on sculpted live edges but may be visible on straight edges.
** All custom orders are processed promptly, typically on the same or following business day to ensure quick turnaround times. Once processing has been started, orders are not eligible for cancellation or refund.
**You can request to see the selected boards prior to the start of the table build. There will be a $75 service fee applied, which covers minor adjustments. Any major adjustments are up to discretion of the shop and may incur additional service fees.
**Any requests/changes to the order after it has been placed may result in longer lead times.
Lead Time -
- Unfinished/DIY Pieces - Ready to ship in 1-2 weeks
- Fully Finished Pieces - Ready to ship in 2-3 weeks.
Adjustments/Cancellation -
- All Custom orders are processed promptly, typically on the same or following business day to ensure quick turnaround times. Once processing has been started, orders are not eligible for cancellation or refund, however, minor adjustments in size and/or finishing details may be possible depending on the initial order size, and the stage of processing it is currently at. (Any requests/changes to the order after it has been placed may result in longer lead times.)
Shipping -
We ship finished and unfinished wood products via LTL Freight & UPS/FedEx Ground throughout the lower 48 states, Alaska & Canada. Each package is custom made and carefully packaged for the products ordered.
Shipping Rates -
- Pick Up From Your Local Freight Terminal - $0
- Commercial Address (Company Name Required) - $69.95
- Residential/Limited Access Address - no liftgate included - $134.95
Delivery Instructions -
Before signing for you freight shipment, it is essential to carefully examine at minimum the external packaging. Make a note on the receipt of any visible signs of damage, including torn packaging, dented/crushed corners, etc. It is important not to sign for the shipment until you have completed this exterior inspection at the very least. If possible, it is even more advantageous to open the package and inspect the contents, and noting any issues visible before signing for the package. If the driver does not permit you to note the damage, ask them to make the damage notes prior to signing it. If they state they will NOT note the damages and there is obvious external damage, call us immediately at (515) 832-8733.
Once your package is received, promptly unpack your order and ensure proper storage of the purchased items. Leaving the order package wrapped on the pallet, or in the crate does not allow for proper airflow, and can encourage the wood to move, possibly leading to cracks, checks, warping, etc. Our packaging is designed for easy removal, requiring a pocket knife or slabs ordered with No Work or only Flattening Services. For Prepared for Finish or Finished Slab work, a T25 bit is required to remove the top of the crate.
If you do not inspect before signing, and do not note any changes or damages on the BOL or Freight Bill, you are, for all practical purposes, waiving the right to collect on a damage claim, even if the damage is discovered later (known as concealed damage). If you suspect there is concealed damage, open the container before signing the BOL and inspect the contents. The driver must stay until the BOL is signed, so do not be intimidated or rushed by them. If you are unable to inspect the contents at that time, please note “Subject to Inspection” on the BOL.
LTL Freight Shipments -
Local Terminal Pickup -
When selecting local terminal pickup, our shipping department will locate your local terminal, and email the address for pickup. Terminal addresses can be located anywhere from 10 minutes, up to 90 minutes away depending on your home address. For further terminals, if you it is far from your home address, reach out and our shipping department can help you find an alternative option, or upgrade to residential delivery.
Commercial Address Delivery -
When Selecting delivery with a commercial address, there is no appointment ordered on the BOL. The freight carrier will load the freight on the next available truck to your location in order to keep your package moving, and deliver without contacting you. You should be available during normal business hours to accept the freight, making sure to watch the tracking to be available to accept and inspect your package.
If you have a loading dock, getting the package off the truck should be simple! However if you do not, please be aware that this is a curbside/dock service and the driver is not responsible for unloading or moving the freight up to, or into your business.
Residential/Limited Access Delivery -
When Selecting delivery with a residential address, the shipment will be sent with a required delivery appointment through the BOL. The freight carrier is required to call you ahead of delivery to schedule a date and time window for the truck to arrive. Please note that LTL Freight shipments differ significantly from standard ground shipping, and may require additional steps on your part.
As the receiver, it will be your responsibility to unload the shipment, sometimes it is necessary to have a forklift or a few strong hands when the truck arrives to help with the unloading! Please be aware that this is a curbside service, and the driver is not responsible for unloading or moving the freight up to, or into your home or business. Liftgate or inside delivery services may be available at an additional cost, but availability varies by area and depends on the size/weight of the shipment!
Canadian Shipments -
Orders shipped to Canada will incur additional duties, taxes, and other fees. These additional fees associated with shipping are the customer's responsibility and are not included in shipping fees charged. The carrier will reach out to you directly with any fees due once the package has been processed through customs. We require a broker for all Canada shipments. If you do not have one, we will assign one through the shipping carrier.
International Shipping -
We can ship worldwide; however, the buyer is responsible for verifying that our product can be shipped into their country and are fully responsible for all broker duties and taxes. For international shipments, we recommend setting up an account with www.myus.com, or a similar shipping service. They are a facility where you can have items shipped in from all over the US and then have them all shipped out to you together. The company will provide you with a US address to ship to, allowing you to take advantage of many Free Shipping promotions! Their rates are based on total weight and they are able to offer much better rates through the Post Office, Fedex , UPS and other carriers.
Other Fees -
Chargeback claims may incur a $25 fee. Storage fees may be accessed if shipments are not picked up from freight terminals within 7 days, or if products are held at our warehouse for final payment before shipping. Please keep in contact with us to avoid these charges.
Damaged Items -
Damage must be reported within 3 business days. Although we package our products diligently to ensure that they come to you in the condition they left our site, we can't always guarantee that they are handled with the care that they require once they leave our shop. In the event that you receive your item(s) and it is damaged, please email us immediately so we can immediately address it with the carrier. Please be sure to provide as much information as you can regarding the package appearance, what was damaged, and be sure to include pictures of the damage.*
If you have a replacement item in mind, please be sure to let us know and we will see what we can do to get that shipped out to you right away.
If your smaller top is shipped with UPS, once we file a claim, they require the original packaging and the item to be held at your residence for up to five business days. Please keep the packaging and item available, and be ready to package it back up for your UPS driver to pick up, should they request an inspection.
Received Incorrect Item -
If your order arrives and it is not right, please email us! Provide as much of a description as you can of what was received versus what you should have been received. If you can include pictures of the item you got, this will help us greatly while investigating the problem!
Common Questions
Q: Are these pictures of the actual slab(s) I will receive, or just one similar?
The pictures you see with this listing are pictures of the exact slab you will receive. Each item is listed as a one of a kind product that can only be sold once. See the “Description” tab for more details regarding this item.
Q: I don't need both (or all) slabs, can I just purchase one of them?
Unfortunately, we cannot split up any of the packages. However, we do have slabs that are sold in singles as well. You can narrow your search down by using our search filters that correlate with your dimensions. You may also use our online chat service to speak with a wood expert while that can help you find various options while you are browsing.
Q: How do the slabs come if I don’t select any finishing options?
A majority of our slabs are planed on both sides before they are listed on the site. This helps smooth out some of the marks left from the saw. You would then have some sanding to do before a finish was applied.
Q: Can you guys custom cut this slab to my dimensions?
Absolutely! We have a full shop that can custom cut any of the slabs. If you have any drawings or sketches of your design, you can always send those directly to service@thelumbershack.com to discuss your project with one of our wood experts!
Q: I see I can add epoxy to my order. What do you offer, and how do I specify want I want?
We do offer epoxy fill services on any slab that is being fully finished by us. This is a popular choice for river table slabs, or any slabs that may have some larger voids or cracks. We use TotalBoat and West Systems epoxy, and have many different colors and shades in blue, gold, copper, black, white, red, purple, and many more! If you would like to add this to your order, please add a note in the notes section when you go to checkout. From there, someone from our team will contact you with a quote and to discuss your design details.
Q: Does “live edge” mean there is still bark on the slab?
The term live edge does not necessarily mean that the slab still has bark on the edges. Often times, the bark has fallen off, and the live edge refers to the surface just below the bark. This has a smoother texture than bark, but still has a very natural look. If the bark is still intact, this will be listed in the Product Features section of the listing.
Q: It says the slab has been planed on both sides. How is that different from flattening?
Most of our slabs are finished planed on both sides. This means the slab was ran through our planer to smooth out the surface of the wood. The main difference is that the planer will not flatten/sand out any of the tapers, bows, cups, or twists that the slab is listed with. You can find these details in the Description section of this listing. The flattening services would remove any tapers, bows, cups, or twists listed with that slab, leaving you with a perfectly level surface on one or both sides of your slab.
More questions? See a full list of common questions and answers here.
